Article Sidebar

Submitted
March 7, 2023
Accepted
March 15, 2023
Published
June 25, 2023
Download
PDF
Statistic
Read Counter : 25 Download : 20

Main Article Content

Abstract

The development of a system designed in such a way as to become a security that makes everyone feel the need to ensure the security of everything that includes himself, both from his activities, and the assets he owns. The magnitude of the value of an asset owned, which encourages everyone to implement an effective and efficient security system as protection. One of them is in Locker cabinets which generally still use a manual locking system. The purpose of this research is to design a locker cabinet door security system by utilizing the Arduino Uno R3-based keypad and E-KTP. This system uses an RFID Reader with a frequency of 13.56 MHz and an ATMega328 Microcontroller which acts as a controller or circuit controller and is tested with hardware and software testing to determine the performance between software and hardware on the device. The result of this research is that the RFID Reader can detect E-KTP with a maximum distance of 2.5 cm and the solenoid will lock back after 3 seconds. Utilization of Renewable Energy is currently a priority in carrying out technology development, one of which is the use of solar energy with solar panels as electrical energy. This research is to support efforts to develop energy-based technology that is converted with various supporting components and system authentication designed using the use of control security systems both in terms of administration and information technology based on population data and uncontrolled system prototypes.

Keywords

Cabinets, RFID, Microcontroller ATMega328, Arduino, E-KTP, Renewable Energy

Article Details

How to Cite
Widiastuti, D. ., Ratnasari, T. ., & Yanti, I. R. S. . (2023). Development of Prototype System Design with the Application of Renewable Technology. TEPIAN, 4(2), 52–57. https://doi.org/10.51967/tepian.v4i2.2242
Download Citation
Endnote/Zotero/Mendeley (RIS)
BibTeX

References

  1. khriana, A., & Irmawati, I. (2019). SISTEM KEAMANAN PINTU LOCKER DENGAN MEMANFAATKAN KEYPAD DAN E-KTP BERBASIS ARDUINO. In SENSITIf: Seminar Nasional Sistem Informasi dan Teknologi Informasi (pp. 389-398).
  2. Daniel Hunt, (2017). RFID A Guide To Radio Frequency Identification, John Wiley & Sons Inc, New York.
  3. Djamal, H. (2014). Radio Frequency Identification (RFID) Dan Aplikasinya. TESLA: Jurnal Teknik Elektro, 16(1), 45-55.
  4. Eko, I. A. (2019). Sistem Keamanan Area Parkir STKIP PGRI Tulungagung Berbasis Radio Frequency Identification (RFID). JoEICT (Journal of Education And ICT), 3(1).
  5. Junaldy, M., Sompie, S. R., & Patras, L. S. (2019). Rancang Bangun Alat Pemantau Arus Dan Tegangan Di Sistem Panel Surya Berbasis Arduino Uno. Jurnal Teknik Elektro dan Komputer, 8(1), 9-14.
  6. Lubis, M. R., Susanti, E., Wirapraja, A., Siregar, M. N. H., Simarmata, J., Fadhillah, Y., ... & Muttaqin, M. (2020). Pengenalan Teknologi Informasi. Yayasan Kita Menulis.
  7. Mulyanto, A., & Kushermanto, Y. B. (2017). Penerapan Teknologi RFID Modul RC522 Berbasis Raspberry Pi B+ Pada Sistem Absensi Siswa di SMK At-Taqwa Cabangbungin Kabupaten Bekasi. Jurnal Informatika SIMANTIK, 2(1), 26-31.
  8. Muttaqin, M., Simarmata, J., Suryawan, M. A., Antares, J., Nur, M. N. A., Ashari, I. F., ... & Andryanto, A. (2023). Internet of Things (IoT): Teori dan Implementasi. Yayasan Kita Menulis.
  9. Nurria, U. F. (2022). RANCANG BANGUN ALAT SISTEM PENGAMANAN PINTU RUMAH MENGGUNAKAN E-KTP BERBASIS MICROCONTROLLER ATMEGA328 (Doctoral dissertation, Universitas Nahdlatul Ulama Sunan Giri).
  10. Puasandi, T. (2014). Sistem akses kontrol kunci elektrik menggunakan pembacaan e-ktp. Jurusan Teknik Elektro Universitas Brawijaya.
  11. Ramadani, R. (2020). Studi Experimental Potensi Penyerapan Energi Matahari Sistem Fotovoltaik di Wilayah Pegunungan Berastagi (Doctoral dissertation).
  12. Rohana, R., & Zulfikar, Z. (2018). OPTIMALISASI PEMBANGKIT LISTRIK TENAGA SURYA UNTUK MENINGKATKAN KAPASITAS DAYA LISTRIK. Kumpulan Penelitian dan Pengabdian Dosen, 1(1).
  13. Saputro, E., & Wibawanto, H. (2016). Rancang bangun pengaman pintu otomatis menggunakan e-KTP berbasis mikrokontroler Atmega328. Jurnal Teknik Elektro, 8(1), 1-4.
  14. Septryanti, A., & Fitriyanti, F. (2017). Rancang Bangun Aplikasi Kunci Pintu Otomatis Berbasis Mikrokontroler Arduino Menggunakan Smartphone Android. CESS (Journal of Computer Engineering, System and Science), 2(2), 59-63.
  15. Setiawan, E. B., & Kurniawan, B. (2015). Perancangan Sistem Absensi Kehadiran Perkuliahan dengan Menggunakan Radio Frequency Identification (RFId). Jurnal CoreIT: Jurnal Hasil Penelitian Ilmu Komputer dan Teknologi Informasi, 1(2), 44-49.
  16. Simarmata, J., Manuhutu, M. A., Yendrianof, D., Iskandar, A., Amin, M., Sinlae, A. A. J., ... & Ginantra, N. L. W. S. R. (2021). Pengantar Teknologi Informasi. Yayasan Kita Menulis.
  17. Simarmata, J., Muttaqin, M., Karim, A., Rismayani, R., Angriawan, R., Nurzaenab, N., ... & Jamaludin, J. (2022). Dasar-Dasar Teknologi Internet of Things (IoT). Yayasan Kita Menulis.
  18. Syafii, R. M., Ikhwanus, M., & Jannah, M. (2018). Desain dan Implementasi Sistem Keamanan Locker Menggunakan e-ktp berbasis arduino pro mini. Jurnal Energi Elektrik, 7(2), 24-30.
  19. Widiana, I. Y., Agung, I. G. A. P. R., & Rahardjo, P. (2019). Rancang bangun kendali otomatis lampu dan pendingin ruangan pada ruang perkuliahan berbasis mikrokontroler arduino nano. J. Spektrum Vol, 6(2).
  20. Yoanda, S. (2017). Peningkatan Layanan Perpustakaan Melalui Teknologi RFID. Jurnal Pustakawan Indonesia, 16(2).
  21. Yudhanto, Y., & Azis, A. (2019). Pengantar Teknologi Internet of Things (IoT). UNSPress.