Hybrid Water Pump with River Flow and Solar Power for Farmer Groups in Plana Village-Banyumas Central Java
DOI:
https://doi.org/10.51967/tanesa.v26i1.3293Keywords:
Plana, Pump, River, Solar, WaterwheelAbstract
Plana Village located in Somagede District, Banyumas Regency, Central Java Province is about 25 km Southeast of the Universitas Jenderal Soedirman Campus. In this village, a small business group is engaged in freshwater fish farming under the names TIRTA LESTARI and GAPOKTAN PLANA JAYA fish cultivator groups. Based on direct observations, the group uses the Serayu River as the primary water source for their fish ponds. The position of the fish pond is around 10 meters higher than the river flow so the water lifting process is carried out using a water pump. The only solution for providing water is to use a machine-powered water pump. The group complained about this solution because they had to pay operational costs for engine fuel. As a result, the group's profits are not optimized. Considering these conditions, a water pump technology transfer activity with a waterwheel as the driving force is planned to develop the results of research and service carried out in the Physics Department, Faculty of Mathematics and Natural Sciences, Universitas Jenderal Soedirman. The goal of the operations that have been conducted is to address partner concerns regarding the provision of water supplies. Activities aimed at becoming an economically productive partner will prioritize key issues, including the implementation of green energy technology, such as hybrid water pumps powered by solar energy and river flow. The next step involves providing training and counseling sessions for the TIRTA LESTARI agriculture group and the merged PLANA JAYA farming group.
References
Alkarrami, F., Iqbal, T., Pope, K., & Rideout, G. (2020). Dynamic Modelling of Submersible Pump Based Solar Water-Pumping System with Three-Phase Induction Motor Using MATLAB. Journal of Power and Energy Engineering, 08(02), 20–64. https://doi.org/10.4236/jpee.2020.82002
Amanda, T., & Fitria, F. (2023). Efisiensi Pompa Hidram Berdasarkan Perbedaan Diameter Pipa Masukan Dan Volume Tabung. SINERGI POLMED: Jurnal Ilmiah Teknik Mesin, 4(1), 23–33. https://doi.org/10.51510/sinergipolmed.v4i1.1003
Aminuddin, J., Effendi, M., Nurhayati, Widiyani, A., Razi, P., Wihantoro, Aziz, A. N., Farzand Abdullatif, R., Sunardi, Bilalodin, & Arifin, A. (2020). Numerical analysis of energy converter for wave energy power generation-pendulum system. International Journal of Renewable Energy Development, 9(2), 255–261. https://doi.org/10.14710/ijred.9.2.255-261
Aminuddin, J., Effendi, M., Nurhayati, Widiyani, A., & Sunardi. (2018). Application of Euler-Lagrange Formalism and Solution of its Equation of Motion in Designing of Hydraulic Pump with Turbine as Driving Force. Jurnal Teras Fisika, 1(September), 15–18. https://doi.org/10.20884/1.jtf.2019.2.2.2060
Aminuddin, J., Nurhayati, Widiyani, A., Razi, P., Wihantoro, Aziz, A. N., Abdullatif, R. F., & Arifin, A. (2020). Estimation of Ideal Configuration and Dimension of Pico Hydropower using Euler-Lagrange Equation and Runge-Kutta Method. Journal of Physics: Conference Series, 1494(1). https://doi.org/10.1088/1742-6596/1494/1/012039.
Anwar, I., Wardianto, D., & Afdal, A. (2023). Pompa Hidram (Pompa Air Tanpa Penggerak Energi Mekanik). Jurnal Teknologi Dan Vokasi, 1(1), 81–85. https://doi.org/10.21063/jtv.2023.1.1.12
Aryanto, N., Jaya, A., & Rudiya, H. (2022). Optimaslisasi Implementasi Tenaga Surya Sebagai Sumber Suplai Sistem Irigasi Lahan Petani Di Desa Pernek. J-POM: Jurnal Pengabdian Olat Maras, 1(1), 35–39. http://www.jurnal.uts.ac.id/index.php/jpom/article/view/1541%0Ahttp://www.jurnal.uts.ac.id/index.php/jpom/article/download/1541/896
Darmawan, F. A., Aqsha, I., & Hambali, A. (2023). Penerapan Teknologi Pompa Irigasi Sawah berbasis Tenaga Surya di Desa Parambambe Kabupaten Takalar Sulawesi Selatan. SEMAR (Jurnal Ilmu Pengetahuan, Teknologi, Dan Seni Bagi Masyarakat), 12(1), 54. https://doi.org/10.20961/semar.v12i1.65873
Dhiva Pratama, A., Hidayah, E., & Utami Agung Wiyono, R. (2021). Penentuan Desain Optimum Penstock untuk Pembangkit Listrik Tenaga Mikrohidro di Sungai Poreng, Jember. Jurnal Teknik Pengairan, 12(1), 71–80. https://doi.org/10.21776/ub.pengairan.2021.012.01.07.
Feliks Eldad Larobu, Yuliadi Erdani, Bahdin Ahad Badia, L. O. M. F. R. (2024). Program Studi Teknologi Listrik Industri Logam , Politeknik Tridaya Virtu Morosi Politeknik Manufaktur Bandung Program Studi Teknologi Metalurgi Industri Logam , Politeknik Tridaya Virtu Morosi 41 Larobu , Feliks Eldad , dkk . ; Rancang Bangun Pembangkit. Jurnal Teknik Mesin, 10(1), 41–47.
Hartadi, B., Irfansyah, M., & Belakang, L. (2024). Rancang Bangun Pompa Hidraulik Ram ( Hidram ) Dengan Head 45 Meter. Seminar Nasional Teknik (SENASTIKA 2024), 2024(Senastika).
Jafri, M., Bale, J. S., & Thei, A. R. (2020). Experimental study of waste valves and delivery valves diameter effect on the efficiency of 3-inch hydraulic ram pumps. International Journal of Fluid Machinery and Systems, 13(3), 615–622. https://doi.org/10.5293/IJFMS.2020.13.3.615
Johanis, A., Mado, R., & Dida, H. (2023). Effect of Waste Valve Tuning on Hydraulic Ram Pump Efficiency. International Conference on Applied Science and Technology on Engineering Science, 237–242. https://doi.org/10.5220/0010943000003260
Negoro, A. C., Agung, Y., Institut, P., Adhi, T., & Surabaya, T. (2024). Pemodelan dan Analisa Pembangkit Listrik Tenaga Microhydro Menggunakan Turbin Crossflow. Seminar Nasional Teknik Elektro, Sistem Informasi, Dan Teknik Informatika , 122–128. https://ejurnal.itats.ac.id/snestikdanhttps://snestik.itats.ac.id
Phyoe Min Than, Cho Cho Khaing, A. H. (2019). Design of a Hydraulic Ram Pumping System. IRE Journals, 3(2), 1–5. https://www.irejournals.com/formatedpaper/1701492.pdf
Putraa, Y. S., Noviani, E., & Muhardi. (2022). Numerical Study of the Effect of Penstock Dimensions on a Micro-hydro System using a Computational Fluid Dynamics Approach. International Journal of Renewable Energy Development, 11(2), 491–499. https://doi.org/10.14710/ijred.2022.42343.
Rochman, S., & Hermawan, A. (2022). Design and Construction of Screw Type Micro Hydro Power Plant. BEST : Journal of Applied Electrical, Science, & Technology, 4(1), 21–26. https://doi.org/10.36456/best.vol4.no1.5444.
Subekti, R. A., Susatyo, A., Sudibyo, H., & Pikra, G. (2020). Utilization of Water Energy Potential on Tail Race for Very Low Head Hydro Power Plant. Proceeding - 2020 International Conference on Sustainable Energy Engineering and Application: Sustainable Energy and Transportation: Towards All-Renewable Future, ICSEEA 2020, 94–101. https://doi.org/10.1109/ICSEEA50711.2020.9306142
Susaidi, A., Sinaga, M. M., Selindo, S., Katolik, U., & Atma, I. (2020). Rancang Bangun Pompa Torak Sebagai Pengumpan Pompa Hidram Dengan Penggerak Kincir Angin. Jurnal Ilmiah Teknik …, 6(1), 18–21. https://garuda.kemdikbud.go.id/documents/detail/2000203.
Tapia, A., R. del Nozal, A., Reina, D. G., & Millán, P. (2021). Three-dimensional optimization of penstock layouts for micro-hydropower plants using genetic algorithms. Applied Energy, 301(August). https://doi.org/10.1016/j.apenergy.2021.117499
Wisudanto, Iftinaniffah, Q., & Utomo, W. (2024). Investment Feasibility Analysis of Rooftop Solar Power Plant for Spare Parts Supply Company. Sebatik, 28(2), 492–500. https://doi.org/10.46984/sebatik.v28i2.2386.
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Buletin Poltanesa

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
The copyright of this article is transferred to Buletin Poltanesa and Politeknik Pertanian Negeri Samarinda, when the article is accepted for publication. the authors transfer all and all rights into and to paper including but not limited to all copyrights in the Buletin Poltanesa. The author represents and warrants that the original is the original and that he/she is the author of this paper unless the material is clearly identified as the original source, with notification of the permission of the copyright owner if necessary.
A Copyright permission is obtained for material published elsewhere and who require permission for this reproduction. Furthermore, I / We hereby transfer the unlimited publication rights of the above paper to Poltanesa. Copyright transfer includes exclusive rights to reproduce and distribute articles, including reprints, translations, photographic reproductions, microforms, electronic forms (offline, online), or other similar reproductions.
The author's mark is appropriate for and accepts responsibility for releasing this material on behalf of any and all coauthor. This Agreement shall be signed by at least one author who has obtained the consent of the co-author (s) if applicable. After the submission of this agreement is signed by the author concerned, the amendment of the author or in the order of the author listed shall not be accepted.