Kemungkinan Pemanfaatan Beberapa Jenis Rotan Non Komersial Ditinjau Dari Sifat-Sifat Fisik Mekanik

Authors

  • Heriad Daud S alusu Politeknik Pertanian Negeri Samarinda
  • Eva Nurmarini Politeknik Pertanian Negeri Samarinda
  • Ita Merni Patulak Politeknik Pertanian Negeri Samarinda

DOI:

https://doi.org/10.51967/tanesa.v21i2.326

Keywords:

Rattan, Physical, Mechanical, Commercial

Abstract

This research was conducted to determine the basic properties of rattan which are related to the possibility of its use, which are physical-mechanical properties consisting of moisture content, density, parallel tensile strength and modulus of elasticity. There were 12 species of non-commercial rattan studied, 11 species included in the small diameter rattan category (<18 mm diameter) and 1 species belonging to the large diameter rattan category (> 18 mm diameter), namely Daemonorops korthlasii Blume. Based on the results of the tests carried out, there are three species of non-commercial rattan that have similar or similar basic properties to commercial rattan, namely Calamus conirostris Becc., Korthalsia ferox Becc., and Calamus muricatus Becc.

References

Anonim, 1994. Himpunan Peraturan Perundang-undangan Tentang Rotan. Pusat Dokumentasi dan Informasi Manggala Wanabhakti. Jakarta
Brown, H.P., A.J. Panshin, and C.C. Forsaith, 1952. Textbook of Wood Technology. Vol. II McGraw-Hill Book Co, New York.
Haygreen, J.G. dan J.L. Bowyer, 1982. Hasil Hutan dan Ilmu Kayu, Suatu Pengantar. Gadjah Mada University Press. Yogyakarta.
Dransfield, J. 1974. A Short Guide To Rattan. Biotrop, Bogor.
Dransfield, J. 1979. A Manual of The Rattans. Biotrop, Bogor.
Dransfield, J. dan N. Mannokaran, 1996. Sumber Daya Nabati Asia Tenggara 6; Rotan. Gadjah Mada University Press dan Prosea Indonesia.
Haury, D. dan B. Saragih, 1996. Pengolahan dan Pemasaran Rotan. GTZ SFMP Document No. 6b (1996). Samarinda.
Januminro, 2000. Rotan Indonesia. Potensi, Budidaya, Pemungutan, Pengolahan, Standar Mutu dan Prospek Pengusahaan. Kanisius. Jakarta.
Kalawa, N. Daniel, M.D. Wiharta, M. Attang S.S., 1998. Mengenal Berbagai Jenis Rotan di Indonesia. Departemen Kehutanan Pusat Penyuluhan Kehutanan. Jakarta.
Rachman, Osly., 1984. Pengaruh Kondisi Penggorengan Terhadap Kualitas Rotan Manau. Jurnal Penelitian Hasil Hutan Vol. 1 No. 4 (1984) pp. 14-19, Lembaga Penelitian Hasil Hutan, Bogor.
Scharai-Rad, M., A. Sulistyo Budi, R. Sastrawijaya, E. Sastradimadja, 1985. Wood Testing. Jurusan Teknologi Hasil Hutan, Fakultas Kehutanan UNMUL, Samarinda.
Soediwinardi, J.F.R., 1996. Penelitian Pengolahan Rotan Manau, Suatu Kegiatan Guna Menyempurnakan Sistim Pengolahan. Duta Rimba/197-198/XX/1996, Jakarta. Hal. 39-47.
Soenardi, 1978. Sifat-sifat Fisik Kayu. Yayasan Pembina Fakultas Kehutanan, Universitas Gadjah Mada, Yogyakarta.
Subekti, D.E. Pengaruh anatomi Terhadap Sifat Fisik dan Mekanik Beberapa Jenis Rotan. Jurusan Kehutanan Fakultas Kehutanan IPB, Bogor.
Triantoro R.G.N., A.R.M. Renwarin, H. Remetwa, 1995. Sifat-sifat Fisik Rotan Asal Hutan Dataran Rendah Pami Manokwari. Fakultas Pertanian Uncen, Manokwari.
Yudodibroto, H., 1982. Sifat-sifat Fisik dan Komposisi Jenis-jenis Rotan di Beberapa Kelompok Hutan Alam Tropis di Kalimantan Timur. Fakultas Kehutanan Universitas Gadjah Mada. Yogyakarta.

Downloads

Published

2020-12-01

How to Cite

alusu, H. D. S., Nurmarini, E. ., & Patulak, I. M. . (2020). Kemungkinan Pemanfaatan Beberapa Jenis Rotan Non Komersial Ditinjau Dari Sifat-Sifat Fisik Mekanik. Buletin Poltanesa, 21(2), 32–36. https://doi.org/10.51967/tanesa.v21i2.326

Issue

Vol. 21 No. 2 (2020): Desember 2020

Section

Forest Product Processing

License

The copyright of this article is transferred to Buletin Poltanesa and Politeknik Pertanian Negeri Samarinda, when the article is accepted for publication. the authors transfer all and all rights into and to paper including but not limited to all copyrights in the Buletin Poltanesa. The author represents and warrants that the original is the original and that he/she is the author of this paper unless the material is clearly identified as the original source, with notification of the permission of the copyright owner if necessary.

A Copyright permission is obtained for material published elsewhere and who require permission for this reproduction. Furthermore, I / We hereby transfer the unlimited publication rights of the above paper to Poltanesa. Copyright transfer includes exclusive rights to reproduce and distribute articles, including reprints, translations, photographic reproductions, microforms, electronic forms (offline, online), or other similar reproductions.

The author's mark is appropriate for and accepts responsibility for releasing this material on behalf of any and all coauthor. This Agreement shall be signed by at least one author who has obtained the consent of the co-author (s) if applicable. After the submission of this agreement is signed by the author concerned, the amendment of the author or in the order of the author listed shall not be accepted.